![]() |
![]() |
#61 |
Dude im telling you trying to take a clear wrap and wrap the carbon fiber. Try going to best buy and buying a hd invisible shield for the ipad. Than try wrapping the carbon. it will look legit
__________________
|
|
![]() |
![]() |
![]() |
#63 |
Is there a metalic white?
How does the adhesive of this stuff compare to clear bra? I took some old clearbra off a car before and it was a fucking nightmare. I would be worried about all the residual glue left behind after removing it. |
|
![]() |
![]() |
![]() |
#64 |
AZHT.net Supporting Vendor
|
There is not a Metallic White(Pretty much the one color that isnt made in Metallic). The closest you can get to that would be the Pearl White which has that appearance of the pearl in it which gives it a slightly metallic look. The one thing about the Pearl white though is that it isnt fully opaque so there quite possibly could be a slight bleed through of the original color where material needs to be streched a bit more then other areas. The adhesive itself is a strong adhesive but when removed should not leave any glue residue behind. The only time it might leave some residue behind is if there had been a vinyl primer applied before the vinyl was installed. The vinyl primer pretty much increases the adhesion to a surface, but that generally isnt used unless the cars panels arent in great shape or on non painted surfaces such as body kits and so forth. A car in good clean condition does not need the stuff applied beforehand. Vinyls are completely different then clear bra material.
|
![]() |
![]() |
![]() |
#65 |
AZHT.net Supporting Vendor
|
Another wrap completed on our good customers 335i. He opted to go with a few small additions to set his car apart from the rest. The ideas were taken from the new 335i M Sport Editions with the Matte Black Skirts and Front Splitter. He wanted to mimic that look so we did Matte Black accents on the side skirts and front bumper along with doing the roof and mirrors in gloss black.
![]() ![]() ![]() ![]() |
![]() |
![]() |
![]() |
#66 |
Finally got some more pics of the civic, here are a couple, the rest can be seen here http://www.azht.net/forum/showthread...04#post3002204
![]() ![]() ![]() |
|
![]() |
![]() |
![]() |
#70 |
TEAM GARAGE BUILT FOUNDER
|
what do you guys charge for gold carbon fiber wrap on hood, roof and trunk of a 2000 civic coupe ?
__________________
TEAM GARAGE BUILT CAR CLUB FOUNDER established 2008 CLUB MOTTOS: Built Not Bought Failure Is Not An Option ![]() ![]() ![]() ![]() |
![]() |
![]() |
![]() |
#71 |
I have a friend that was looking to wrap his 370z, cost for entire car in the grey that is on the HAWK BMW or the same as the lexus ^
__________________
Duct tape is The Force: It has a light side, a dark side, and it holds the universe together. ![]() |
|
![]() |
![]() |
![]() |
#74 |
Obama Basedgod
|
Can you guys custom print something on vinyl or only the pre made vinyls?
__________________
Get up off the pavement brush the dirt up off my psyche www.molliwopped.com http://www.last.fm/user/molliwoppd |
![]() |
![]() |
![]() |
#75 |
AZHT.net Supporting Vendor
|
We dont have the ability to custom print anything onto vinyl right now but if you were to have a sign shop or graphics shop print something out for you we could by all means install it on your vehicle for you.
|
![]() |
![]() |
![]() |
#76 |
AZHT.net Supporting Vendor
|
This is the latest project to leave us. A Veilside RX-7. This car was purchased by a new owner and he came to us wanting to get rid of the Purple/Black exterior it had going on. The body of this car was very neglected and had numerous problems including chipping and cracking paint and then even chunks actually missing in certain areas. Now not having the ability to sand the entire car down and make the body nice and smooth again due to the customers budget concerns, we took on the task of doing some light bodywork to fix and knock down some of the major problem areas. We did our best in those areas to fill and sand everything smooth and they came out pretty good. This body is by no means perfect but it was enough to get the wrap looking good enough to change this car and rehab the exterior. It was wrapped with 3M Anthracite and Carbon Vinyl. Check out some of the pictures below!
![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() |
![]() |
![]() |
![]() |
Thread Tools | |
Display Modes | |
|
|