Swirl pots
Was wondering if anyone has used them for their road race cars. I see setups for fuel swirl pots and i saw a coolant one on k20 built by pacman. But it didnt seem to make sense to me. Can I just run the swirl pot inline between the head and upper rad hose?
|
I believe you want it on the out let line, not the inlet. we had one on the shop s2000 but its been so long since i looked it at i'm not 100% what was done (was built way before i got there)
|
|
Ok I saw that now tell me how to route a hose directly to the combustion chamber
|
That hose should come right off the bleeder screw.
|
Not sure k series have them.... Still it makes no sense. Stand by ill get on my laptop and post pics
|
Then T a hose into the highest part of the coolant system. That's what the "combustion chamber hose" is representing
|
|
|
I don't think those are doing anything other than filling with coolant...
The point of the swirl pot is for trapped air to be able to escape. |
aww shit i didnt even realize that the radiator in the crx was turned sideways
|
All times are GMT -7. The time now is 06:51 PM. |
Powered by vBulletin® Version 3.8.0
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
ŠAZHT.net 2004-2021