AZHT.net

AZHT.net (http://www.azht.net/forum/index.php)
-   Wheel / Tire / Suspension (http://www.azht.net/forum/forumdisplay.php?f=95)
-   -   Crv spindles on em1 (http://www.azht.net/forum/showthread.php?t=204030)

h8mydc2 07-09-2017 11:17 AM

Crv spindles on em1
 
Anyone on here use crv front spindles on a civic?
If so did YouTube any issues getting it aligned? Did this to my em1 and the right side is maxed out and they still can't get rid of the toe. Was fine before with the em1 spindles wondering if maybe I got a bent spindle

cbaracing 07-09-2017 04:30 PM

Crv spindles are physically bigger than 96-00 civic spindles regardless of trim level. Hence the reason you can't get it aligned. It's like putting 90-93 integra suspension on 88-91 civic/crx. You may get it to go on but it will never be right:2cool:

h8mydc2 07-09-2017 05:25 PM

Passenger side tie rod all the way in and they couldn't get rid of the toe, on the driver side tie rod almost all the way out but they were able to get that in specs. They where saying the rack and pinion needeneeded to be shifted but didn't know that was even possible. Car was fine when it had the 4 Lug on

cbaracing 07-10-2017 05:10 PM

Of course it was fine when it had 4 lug on cause that's what it's supposed to come with. You didn't listen to a word I said. :facepalm:

king06 07-11-2017 04:13 PM

Lol


"but why?"

cbaracing 07-11-2017 04:43 PM

The why is people think they can do a 5lug conversion on the cheap using crv parts. News flash. It don't work :flush:


All times are GMT -7. The time now is 12:42 PM.

Powered by vBulletin® Version 3.8.0
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
ŠAZHT.net 2004-2021