looking for input
I have an lsv motor have stock ctr head with ctr cams on an ls block with stock ls pistons. Micro polished b20 crank. Eagle h beam rods. Skunk2 intake mani. Looking to get more power. Want to change the pistons wondering what I should go for. I have a chance to get ctr pistons. Would they be worth it? All input welcome besides shit taking. Thanks
|
Put b17 pistons in they are by far the best oem piston.
|
most people burn up the ctr pistons. you have a b18 81mm or b20 84mm?i would use cp pistons
|
So did you make the stock pistons full floating or just believe that crock of shit from the person you bought the motor from?
|
Changing pistons wont give u much more power than what you're producing right now..
|
X2 on the pistons. So you put rods in it, but left stock pistons?
|
ummmmm.... compression is everything when if comes to engine efficiency
|
I completely understand that but what im saying is with my stock b16, if I decided to install ctr pistons I really can't expect a huge difference in power.
|
I would get a set of 12:5:1 CP pistons and run e85. Also if the head is off send it out to get a CNC port and polish with a good valve job.
|
Yes I built the block I had a b20v witch blew up so I got an ls block and I had 85mm pistons witch wont fit in an ls so I had ls pistons put on the rods yes. The way I worded it at first seems sketchy yes I see that know lol but I took everything I had in the b20 out and put it in the ls. Besides pistons but im just going with b16 pistons
|
Man up, 13.5+ on E85! I am going to be running close to your recommendation in my DD turbo FRS. lol Hell I was running 12.5:1 in it with a supercharger on E85...
|
All times are GMT -7. The time now is 08:20 PM. |
Powered by vBulletin® Version 3.8.0
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
ŠAZHT.net 2004-2021